Sec3 COSPs 10 - Jigsaws & Reciprocating Saws
1. Follow all practices in Code of Safe Practice #5 Power Tools.
2. Always wear appropriate PPE (safety eyewear, hearing protection, etc.).
3. Ensure all guards are in place prior to using power tools. Never wedge guards open or remove guards.
4. Check your working materials carefully before proceeding. Make sure there are no nails, bolts or flaws before you cut materials with the saw.
5. Keep your hands and all body parts out of the path of the saw blade.
6. Be aware that the saw blade extends below the cutting surface. Check below the work surface for proper clearance and to ensure that the saw does not strike the workbench power cord, your co workers or yourself.
7. Do not cut through hollow pipe with a reciprocating saw.
8. Always hold the saw firmly.
9. Ensure the blade is away from the work surface when switching the power on.
10. Do not through walls or areas that may contain energized electrical wires or charged pipes without ensuring that the wiring and/or pipes are disconnected.
11. Do not touch the blade after cutting. Allow time for it to cool down.
12. Use the appropriate blade for the material that is being cut.
13. When cutting through a flat surface, first bore through the work surface with a drill. Do not attempt to use the saw to bore a hole or to make a plunge cut.
14. Don't cut material unless it is properly supported. Do not support it with your hand or arm and not against your knee or foot. Do not cut any material next to your body.
15. Make all adjustments with the saw’s power off. Disconnect the power when changing blades.
16.Do not leave the saw unattended while it is running. Leave only after the saw has been turned off and it has come to a complete stop.